• Becoming a member is completely free!

    • Join the community and start contributing to a large source of sea angling information.
    • Members who are regular contributors and have posted more than 25 times, will see no adverts.
    • Become an active member and you can enter member exclusive competitions.

    REGISTER FOR FREE HERE

Any views on Travel Beach casting rods against 2 piece?

Graeme1984 said:
Found the greys triad a really useful rod, to keep across the boot of the car as a spare in matches etc when I had to use one rod but fancied having a decent back up just in case.
With the reducer it takes the rod up to 14ft so a good usable size. The only problem was I snapped the tip due to a casting disaster (my own fault). Luckily found a replacement rod on eBay recently, so will hope that has better luck!
Click to expand...
How far from the tip did it snap Graeme?
A fellow forum user snapped a Continental rod about 5" down from the tip, so gave it to me as I hoped I could fix it.

There are lots of various sized options on eBay for Carbon fibre tubing, so a length of that & some epoxy, and the job was a good 'un.
I had to ream one end of the inside of the tube down a fraction to get it to fit the blank, but done 2 seasons of light use now & it's great!

The long length of tubing through the eyes was a spare bit to keep everything lined up while the epoxy set. I've since painted the repair white and you hardly notice it.


Vertix repair 2.jpg
 
Trampster said:
How far from the tip did it snap Graeme?
A fellow forum user snapped a Continental rod about 5" down from the tip, so gave it to me as I hoped I could fix it.

There are lots of various sized options on eBay for Carbon fibre tubing, so a length of that & some epoxy, and the job was a good 'un.
I had to ream one end of the inside of the tube down a fraction to get it to fit the blank, but done 2 seasons of light use now & it's great!

The long length of tubing through the eyes was a spare bit to keep everything lined up while the epoxy set. I've since painted the repair white and you hardly notice it.


View attachment 43525
Click to expand...

It snapped in two places unfortunately, 4 inches from the tip and halfway down, and not clean breaks either!
By some chance I had an old three piece rod in the corner of the garage and the tip section was perfect fit and length, a friend re-ringed it with the old rings off the bust section and it seems to blend in lovely. Not used it since the repair as I found the other one off ebay but I think it will work fine, certainly as a spare.
Your repair sounds brilliant!
 
I’ve managed to get my beach casters in a Toyota Aygo noddy car when I had it as a courtesy car.

Okay wouldn’t do if there were other people and luggage in the car but if it’s for a normal fishing trip, it’s surprising what you can get in small cars, don’t need five piece rods…
 
Graeme1984 said:
It snapped in two places unfortunately, 4 inches from the tip and halfway down, and not clean breaks either!
By some chance I had an old three piece rod in the corner of the garage and the tip section was perfect fit and length, a friend re-ringed it with the old rings off the bust section and it seems to blend in lovely. Not used it since the repair as I found the other one off ebay but I think it will work fine, certainly as a spare.
Your repair sounds brilliant!
Click to expand...
The Conti rod wasn't a clean break but having got the carbon Fibre tube to size, it all lined up well inside the tube when I pushed it back together with plenty of Epoxy!


Johns Vertix4.jpg
 
Mr Fish said:
That’s how I got them in the Toy Motor thing lol
Click to expand...
Ah, the beauty of Jeepy! Just over 10ft from front screen to rear tailgate glass. Got 2 sections of my Conti rod stuck together the first itme I used it and they went in in one piece no problem. Always the factory fitted roof bars for anything that won't go inside! 😁😁
 
Trampster said:
Ah, the beauty of Jeepy! Just over 10ft from front screen to rear tailgate glass. Got 2 sections of my Conti rod stuck together the first itme I used it and they went in in one piece no problem. Always the factory fitted roof bars for anything that won't go inside! 😁😁
Click to expand...
Yep my estate is plenty long enough 😇
 
Trampster said:
The Conti rod wasn't a clean break but having got the carbon Fibre tube to size, it all lined up well inside the tube when I pushed it back together with plenty of Epoxy!


View attachment 43531
Click to expand...

Another "fix" I have used with tip breaks I have had is to cut the blank just in front of the first guide down the rod from the break and glue in a quiver tip. The rod may not still have the maximum casting weight but might then be even better for more sensitive jobs.

Quiver tips can be bought from many tackle shops and range up to 5 oz tips, sometimes stronger. I have converted a damaged Daiwa bass rod into a quivertip rod for heavy river fishing that way and it's very useful. Sensitive but can cast a long way!
 

Support Us

Support from our members means we don't need to plaster advertisements around the website! Keeping it clean and fresh! Maintaining a website such as this takes time and money, and your support helps to keep the lights on, provide new features for the website and, hopefully, make you feel warm and fuzzy!

Thank you for considering to help support our work.
Donate
Back
Top